OER 1967-72 Chevrolet/GMC Pickup Full Cab Floor Pan with Under Floor Braces T70815

• For Low hump floor.

Fitment Note: As a general rule, with few exceptions, all 2 wheel drive, automatic transmission trucks required the low hump floor. All manual transmission and 4 wheel drive models required the high hump for transmission and transfer case clearance. Big Block models with automatic or manual transmissions also required a high hump floor.

OER® Authorized reproduction of the complete floor pan for 1967-72 Chevrolet or GMC pickup trucks. Now you can change the whole floor pan rather than piece by piece. This stamped steel panel is manufactured to factory specification and will replace your rusted or damaged original.

It comes with all the underside bracing, so you do not have to reuse the ones off the old floor.

This part features a black electrophoretically deposited coating (EDP, or E-coat) for superior long-term corrosion protection.^⁕

Note: Shipped truck freight.

• 1967-72 Chevrolet/GMC C-series 1/2 ton pickup

^⁕ Many sheet metal products are delivered with a black electrophoretically deposited coating (EDP, or E-coat) for superior long-term corrosion protection, while others use a similar lacquer-based coating designed to provide protection for storage and shipping. Before installation, OER® recommends applying lacquer thinner with a shop towel to determine the type of coating. If the coating is removed by lacquer thinner, then it should be completely stripped from the product before any primer or paint is applied. If the lacquer thinner does not remove the EDP coating, it can simply be prepped, primed and painted without stripping.

The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.