Reproduction windshield wiper arm for various Chevrolet and GMC applications. Each arm features polished stainless steel construction and a die-cast chrome-plated base with the correct 1/2" small knurl design. The blade end of the arm is produced with the 3/16" narrow-style bayonet for a snap-in installation of the blade (sold separately). Arm measures approx. 13-1/2" from the bayonet end to the center of the wiper shaft. Sold individually. Wiper blade available separately.
Note: This arm is original equipment for 1960-66 GM truck, but is a service replacement for 1958 Full Size Passenger Car. Service replacement arms may differ cosmetically than the original equipment arms, but will fit and function properly when mated to the recommended blade. For 1958 Full Size Passenger Car, we recommend part # TF400298 wiper blade. For 1960-66 GM truck, we recommend part # CX1466.
Chevrolet Passenger Car Applications:| Make | Model | Years |
| Chevrolet | Bel Air | 1958 |
| Chevrolet | Biscayne | 1958 |
| Chevrolet | Brookwood | 1958 |
| Chevrolet | C10 Panel | 1960 - 1966 |
| Chevrolet | C10 Pickup | 1960 - 1966 |
| Chevrolet | C20 Pickup | 1960 - 1966 |
| Chevrolet | C30 Panel | 1960 - 1966 |
| Chevrolet | C30 Pickup | 1960 - 1966 |
| Chevrolet | Del Ray | 1958 |
| Chevrolet | Impala | 1958 |
| Chevrolet | K10 Pickup | 1960 - 1966 |
| Chevrolet | K20 Pickup | 1960 - 1966 |
| Chevrolet | Nomad | 1958 |
| Chevrolet | Suburban | 1960 - 1966 |
| Chevrolet | Truck | 1960 |
| Chevrolet | Yeoman | 1958 |
| Dodge | Truck | 1960 |
| GMC | 1000 Series | 1960 - 1965 |
| GMC | 1000 | 1966 |
| GMC | 1500 Series | 1960 - 1965 |
| GMC | 1500 | 1966 |
| GMC | 2500 Series | 1960 - 1965 |
| GMC | 2500 | 1966 |
| GMC | 3500 | 1966 |
| GMC | K1000 Pickup | 1966 |
| GMC | Suburban | 1960 - 1966 |
| GMC | Truck | 1960 |
| Plymouth | Suburban | 1960 |
| Height | 13 in |
| Length | 1 in |
| Weight | 1 lbs |
| Width | 2 in |
