Now made by Scott Drake. Steel brackets with dull black finish. Includes mounting hardware.
Features:Dull Black FinishIncludes Mounting Hardware
Holley Performance Emission Code 6: Vehicle emissions regulations are not applicable to this…
New Caution Engine compartment decals for fan shroud, convertible top, and battery. All of our decals were reproduced from original Ford decals in intricate detail and feature correct shape, design, and coloring for the concours…
Reproduction Of Original Requires 4 Per Vehicle This is the cage nut that is used in all 4 corners of the fan shroud to attach it.
Does not come with hardware.
…
Maximum Airflow At Low RPM
Reduced Eng. Load At High RPM
Less Resistance At Hwy Speeds
More Horsepower
Better Gas Mileage
2.25 in. Projected Width
10000 RPM Rating
Standard Mounting Pattern
…
Replacement 17" Steel Fan Blade
For Use With Clutch P/N 160752
Will Not Work With Reverse Rotation Water Pumps
This universal fan blade is constructed like the original GM versions, and works with many standard…
Maximum Airflow At Low RPM
Reduced Eng. Load At High RPM
Less Resistance At Hwy Speeds
More Horsepower
Better Gas Mileage
2.25 in. Projected Width
10000 RPM Rating
Standard Mounting Pattern
…
Important:
Due to non-factory engine and radiator swaps please check the measurements we have provided to verify fit before ordering.Measurements:
Overall Height: 22"
Overall Width: 24¾"
Overall Thickness: 3"
Vertical Mounting Holes C-C…
This 3-1/2 Wide Plastic Fan Shroud efficiently draws cool air in through your Mustangs radiator when youre driving at a low speed and when youre idling, which is when your Mustang is the most likely to overheat. Made from heat-resistant…
Kit Includes:
• Upper and Lower Rubber Pads
• Bolts and Spacers
• Nuts and **Washers**Extra washers are included for height adjustments on some applications
Ford Radiator Support Kit for 1965-79 Ford Truck
Dennis Carpenter…
Flex-a-lite® reversible 16-inch Syclone S-Blade electric-fan. A powerful electric motor helps this fan move an impressive 2,500 cfm of airflow. Can be used as an auxiliary or primary cooling.
Puller: Yes
Pusher: Yes
Fan CFM Range…
Steel reproduction of original fan shroud used in 63/66 Falcons and Rancheros with 260 and 289 engines. Fits 260, 289 engines only. This will not work on a car with factory air! Fan shrouds do not include brackets, brcakets sold…
The Flex-a-lite® Quick Start Variable Temperature Controller turns the electric fan on and off at the desired temperature. You can easily adjust the activation temperature between approximately 160-240 degrees Fahrenheit. It also turns…
Flex-A-Lite auxiliary illuminated switches provide cockpit control or override of fan function. These switches may be wired to actuate a fan regardless of temperature settings (at the end of a heat or at the beginning of a hard pull), or…
Flex-a-lite® 15-inch Black Magic Xtreme S-Blade reversible electric fans feature 3,300 cfm of airflow. Replacing a belt-driven fan with one of these powerful electric fans can recover engine power and increase fuel economy. These fans…
Two Sealed, Deep-Groove Ball Bearings Eliminate The Need To Oil And Keep The Unit Spinning For Years And Miles Of Use
Body Made Of Tempered Aluminum, Effectively Doubling The Tensile And Yield-Strength To Combat The Stress Of…
Designed for use with Mr. Gasket flex fans, spacers allow adjustment of fan-to-radiator clearance. The kit includes spacer, washer and bolts.
Features:Spacers Allow Adjustment Of ClearanceIncl. Spacer; Washer and Bolts
Holley Performance…
Help your engine keep cool by adding an electric cooling fan to your radiator
Free up horsepower by removing your engine driven mechanical fan and installing this electric fan
Curved blade design reduces noise
Wide radiators can…
High Quality Reproduction
Perfectly Replaces Original
Injection Molded Plastic That Won't Rust!
Diameter:
The fan opening measures 19-13/16" diameter and the flange are 2-1/2"…
S.A.Dearborn Classics offers high quality reproduction fan shrouds for most models of Ranchero, Fairlane and Torino. All of our fan shrouds are manufactured of durable ABS plastic and are manufactured in the U.S.A. Fan shrouds feature…
New fan clutches are available for a large variety of Ford inline 6 cylinders and v-8's. Upgrade your tired original with this new fan clutch for improved reliability in your cooling system. Both thermally and non-thermally activated…
Features:
• (1) Pair - Driver (Left) and Passenger (Right)
• With Factory Air
• Die Cut for Precision Fit
• Made in the USA by Dennis Carpenter
• Attaching Hardware IncludedMeasurements:
Overall Length: 23⅞"
Wide End…
Important:
Due to non-factory engine and radiator swaps please check the measurements we have provided to verify fit before ordering.Measurements:
Overall Height: __"
Overall Width: __"
Overall Thickness: __"
Vertical Mounting Holes C-C…
Keep your engine running cool by replacing a damaged or missing original. This is a reproduction of the OEM type fan shroud designed to replace your broken or missing original.
Measures 28-1/2" wide x 18-1/2" tall with a 21-1/4" fan…
390 & 428 Fan Alt w/o smog (air) pump w/ AC WP = Water Pump Std = Standard (manual) Tran = Transmission Gen = Generator Amp = Ampere Alt = Alternator LN = Leece-Neville (Alt) w/o = without w/ = with PS = Power Steering AC = Air…
0851-256 This fan shroud fits:1981-1987 Chevrolet Pickup w/o AC w/305 or 3501981-1987 GMC Pickup w/o AC w/305 or 3501981-1991 Chevrolet Blazer and GMC Jimmy w/o AC w/305 or 3501981-1991 Chevrolet or GMC Suburban w/o AC w/305 or…