Reproduction fuel tank for the 1987 Chevrolet and GMC C/K Pickup. This tank is correct for use on short bed models equipped with a gasoline engine with electronic fuel injection (EFI) only. This tank is not for use on diesel applications.
Made like OE. Each tank features the correct shape, size, bends, curves, holes and exterior finish, like original. Ship complete with fuel sending unit lock ring and gasket. Utilizes 1 5/8" inner diameter filler pipe. Correct for use on LH (driver) or RH (passenger) side - as required.
Replaces GM part# 15548967
Tank Dimensions: 42-7/8" x 14-1/8" x 11"
Gallons: 16
Liters: 61
This fits:1987 Chevy C10 Pickup Short Bed 4.3L V6 EFI
1987 Chevy C10 Pickup Short Bed 5.7L V8 EFI
1987 Chevy C10 Pickup Short Bed 5.0L V8 EFI
1987 Chevy C20 Pickup Short Bed 5.7L V8 EFI
1987 Chevy C20 Pickup Short Bed 5.0L V8 EFI
1987 Chevy C20 Pickup Short Bed 4.3L V6 EFI
1987 Chevy C20 Pickup Short Bed 7.4L V8 EFI
1987 Chevy C30 Pickup Short Bed 7.4L V8 EFI
1987 Chevy C30 Pickup Short Bed 5.7L V8 EFI
1987 Chevy K10 Pickup Short Bed 5.0L V8 EFI
1987 Chevy K10 Pickup Short Bed 4.3L V6 EFI
1987 Chevy K10 Pickup Short Bed 5.7L V8 EFI
1987 Chevy K20 Pickup Short Bed 5.7L V8 EFI
1987 Chevy K30 Pickup Short Bed 7.4L V8 EFI
1987 Chevy K30 Pickup Short Bed 5.7L V8 EFI
1987 GMC C15 Pickup Short Bed 5.0L V8 EFI
1987 GMC C15 Pickup Short Bed 4.3L V6 EFI
1987 GMC C15 Pickup Short Bed 5.7L V8 EFI
1987 GMC C25 Pickup Short Bed 7.4L V8 EFI
1987 GMC C25 Pickup Short Bed 5.7L V8 EFI
1987 GMC C25 Pickup Short Bed 5.0L V8 EFI
1987 GMC C25 Pickup Short Bed 4.3L V6 EFI
1987 GMC C35 Pickup Short Bed 5.7L V8 EFI
1987 GMC K15 Pickup Short Bed 5.7L V8 EFI
1987 GMC K15 Pickup Short Bed 5.0L V8 EFI
1987 GMC K15 Pickup Short Bed 4.3L V6 EFI
1987 GMC K25 Pickup Short Bed 5.7L V8 EFI
1987 GMC K35 Pickup Short Bed 7.4L V8 EFI
1987 GMC K35 Pickup Short Bed 5.7L V8 EFI
About Auto Metal Direct
Auto Metal Direct is a team of true car guys with years of experience in sheet metal reproduction, car restoration and paint/body work. We believe that quality is not subjective! Our mission is to provide the best customer experience for the Ford, Mopar and GM classic car markets - both in products and in service.
Our panels are made from proper gauge steel and include all correct-as-original clips, tabs, flanges, bends and seams. Each time a prototype body panel comes off of a new tooling, we test fit it on a car. The marked up prototype is then used to change and improve the tools, and a new prototype is produced. This procedure might be repeated multiple times but, once the part is finally approved, you can be assured of a quality part.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
C20 |
1987 |
OVERSIZE 1
