IMPORTANT: Electrical items are covered by a 30 day EXCHANGE ONLY WARRANTY. There are no returns or refunds on such items.Factory Fit rear body harnesses are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped and ready to install upon arrival. The rear body light harness typically connects to the dash harness or rear body intermediate harness in some applications.
This harness will follow the original routing, and most rear body light harnesses will include all lamp sockets for the rear of the vehicle. Some applications (specifically the 1961-65 Fullsize passenger car models) will require separate jumper harnesses for tail lamps. Please check your original harness, or a factory assembly manual to verify the harnesses required for your restoration. If in doubt, do not hesitate to contact our Sales team for assistance!
Rear Body Light Harness For
REAR BODY LIGHT HARNESS, STEPSIDE, rear frame connector to rear light assemblies
(Note: does not include the light sockets as they are part of the lamp assemblies)
| Make | Model | Years |
| Chevrolet | C10 Suburban | 1979 - 1984 |
| Chevrolet | C10 | 1979 - 1984 |
| Chevrolet | C15 | 1982 - 1984 |
| Chevrolet | C20 Suburban | 1979 - 1984 |
| Chevrolet | C20 | 1979 - 1984 |
| Chevrolet | C30 | 1979 - 1984 |
| Chevrolet | C35 | 1983 - 1984 |
| Chevrolet | K10 Suburban | 1979 - 1984 |
| Chevrolet | K10 | 1979 - 1984 |
| Chevrolet | K20 Suburban | 1979 - 1984 |
| Chevrolet | K20 | 1979 - 1984 |
| Chevrolet | K30 | 1979 - 1984 |
| Chevrolet | K5 Blazer | 1979 - 1984 |
| Chevrolet | S10 Blazer | 1983 - 1984 |
| Chevrolet | S10 | 1982 - 1984 |
| Proposition 65 | WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. |
