Tempered Green Rear Window Glass (1037 T GTN) is a direct-replacement rear windshield designed to restore vehicle safety, visibility, and exterior appearance after damage. The tempered green tint reduces glare and provides a factory-style look while the heat-treated construction increases impact resistance and breaks into small, blunt fragments for improved occupant safety. Finished edges and pre-cut dimensions simplify installation with standard urethane bonding, making this glass a durable, reliable option for restoration or maintenance projects.
Features:
- Tempered green safety glass for reduced glare and a factory-style appearance.
- Tempered construction increases impact resistance and breaks into safer fragments on failure.
- Precision-cut, finished edges prepared for urethane bonding—ready for installation.
- Restores structural integrity, weather sealing, and rearward visibility after windshield damage.
- Designed for restoration and replacement applications; durable and long-lasting.
- Works with standard rear-window fittings; compatible with common defroster/antenna configurations when applicable.
Installation / Application:
- Difficulty: 3/5
- Estimated time: 1–2 hours (plus adhesive cure time; full adhesive cure typically 24 hours)
Instructions:
- Park vehicle on level ground and wear safety gear (gloves, eye protection).
- Remove interior trim and any exposed molding around the rear window to access the pinch weld.
- Carefully cut and remove remaining old adhesive using an appropriate cut-out tool or wire; lift out the damaged glass with suction cups if still present.
- Clean the pinch weld and surrounding flange thoroughly of old urethane, dirt, and rust; use solvent and a clean rag to ensure a dry, oil-free surface.
- Apply primer to the pinch weld and to the glass bonding area if recommended by the adhesive manufacturer; allow primer to flash as directed.
- Apply a continuous, properly sized bead of urethane adhesive to the pinch weld per adhesive instructions (follow manufacturer bead profile recommendations).
- With two people using suction cups, lift the new tempered rear glass and carefully position it over the opening; set the glass into the adhesive bead and align it to factory gaps and orientation.
- Press the glass evenly into the adhesive to ensure full contact; use masking tape to secure the glass in position while adhesive begins to cure.
- Reinstall interior trim and molding after the adhesive has set enough to hold the glass (follow adhesive handling time).
- Allow the urethane to reach its recommended full cure before driving (commonly 24 hours); avoid slamming doors or exposing the seal to water during initial cure.
- After full cure, inspect the fit, trim, and seals for proper installation and clean the glass surface.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
C10 Pickup |
1960 - 1966 |
| Chevrolet |
C20 Pickup |
1960 - 1966 |
| Chevrolet |
C30 Pickup |
1960 - 1966 |
| Chevrolet |
C40 |
1960 - 1962 |
| Chevrolet |
C50 |
1960 - 1966 |
| Chevrolet |
K10 Pickup |
1960 - 1966 |
| Chevrolet |
K20 Pickup |
1960 - 1966 |
| GMC |
1000 Series |
1960 - 1965 |
| GMC |
1000 |
1966 |
| GMC |
1500 Series |
1960 - 1965 |
| GMC |
1500 |
1966 |
| GMC |
2500 Series |
1960 - 1965 |
| GMC |
2500 |
1966 |
| GMC |
K1000 Pickup |
1966 |
| GMC |
K1000 |
1966 |
| GMC |
K15/K1500 Pickup |
1966 |
