This 4-piece left and right beltline molding kit (black) provides a complete set of exterior trim pieces to restore and vehicle’s beltline — the seam between door and window. The moldings conceal and protect the sheetmetal edge, help retain weatherstrip positioning, reduce wind noise and vibration, and restore a clean, factory-like appearance. Built with a durable black finish for long-lasting resistance to UV and road corrosion, the kit is ideal for restoration projects, replacement of worn or missing trim, and improving curb appeal with an accurate-fit design.
Features:
- Complete 4-piece left and right beltline molding kit for full-side coverage.
- Durable black finish resists fading, moisture and road corrosion.
- Precisely formed pieces promote consistent gap alignment and a factory look.
- Helps secure weatherstrip, reduce vibration noise, and protect door edge from damage.
- Straightforward installation using original clips or supplied hardware—ideal for restoration or repair.
Installation / Application:
- Difficulty: 2/5
- Estimated time: 30–60 minutes
Instructions:
- Verify kit contents and identify left/right and front/rear orientation by dry-fitting each piece against the beltline.
- Carefully remove existing molding and clips using a trim removal tool or flat screwdriver; retain any reusable clips or hardware.
- Thoroughly clean the mounting surface with a suitable cleaner and dry completely to ensure good adhesion/fit.
- If the new moldings use clips, install clips into the molding or transfer original clips to the new pieces; if adhesive-backed, apply primer per adhesive instructions.
- Align the front of the molding to the body lines, use masking tape as a guide if needed, then press the molding into place working along its length.
- For clip-secured pieces, press firmly until each clip snaps into the body; for adhesive-backed pieces, apply even pressure along the molding to bond.
- Trim or secure any overlapping sections and reinstall any removed door hardware or trim components.
- Allow adhesives or sealants to cure per manufacturer guidance before washing the vehicle or exposing to heavy use; check fit and retighten fasteners if necessary.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
C10 Suburban |
1967 - 1972 |
| Chevrolet |
C20 Suburban |
1967 - 1972 |
| Chevrolet |
K10 Suburban |
1967 - 1972 |
| Chevrolet |
K20 Suburban |
1967 - 1972 |
| GMC |
C15/C1500 Suburban |
1968 - 1972 |
| GMC |
C25/C2500 Suburban |
1968 - 1972 |
| GMC |
K15/K1500 Suburban |
1967 - 1972 |
| GMC |
K25/K2500 Suburban |
1968 - 1972 |
