Door Sill Plates - Black Plastic - LH & RH Pair - 78-87 Chevy GMC C/K Squarebody Truck
Door Sill Plates - LH Driver Side & RH Passenger Side PAIR - OE style textured decorative plastic covering that fits at the door entrances on your 1978-1987 Chevy / GMC C10 C20 C30 K10 K20 K30 Squarebody Pickup Truck. These are a direct factory replacement for your C/K truck.
You can easily paint these to match your factory interior color or customize it to match your new interior.
These Door Sill Plates are designed to fit 78-87 Chevy GMC C/K Squarebody Truck models. Made from high-quality black plastic, they are durable and built to last. The LH & RH pair of door sill plates are easy to install, and provide protection against wear and tear for your vehicle's interior.
Door sill plates are a great way to enhance the appearance of your truck while also providing added protection to the door sills. They are especially useful in preventing damage to the sills caused by shoes and other debris that may accumulate over time.
These door sill plates are a direct replacement for the original sill plates and are designed to fit seamlessly into the door sill area. They are precision cut to match the exact contours of your vehicle, ensuring a perfect fit every time.
In addition to providing protection, these door sill plates also add a touch of style to your truck's interior. The black plastic finish provides a sleek, modern look that complements any color scheme.
Installation of these door sill plates is easy and can be done in just a few minutes. Simply remove the old sill plates and replace them with the new ones. The LH & RH pair of door sill plates are sold together as a set.
Overall, these Door Sill Plates are an excellent addition to any 78-87 Chevy GMC C/K Squarebody Truck. They provide added protection to the door sills while also enhancing the overall appearance of your vehicle.
Auto Metal Direct is a team of true car guys with years of experience in sheet metal reproduction, car restoration and paint/body work. We believe that quality is not subjective! Our mission is to provide the best customer experience for the Ford, Mopar and GM classic car markets - both in products and in service.
Our panels are made from proper gauge steel and include all correct-as-original clips, tabs, flanges, bends and seams. Each time a prototype body panel comes off of a new tooling, we test fit it on a car. The marked up prototype is then used to change and improve the tools, and a new prototype is produced. This procedure might be repeated multiple times but, once the part is finally approved, you can be assured of a quality part.
| Make | Model | Years |
| Chevrolet | C10 | 1978 - 1986 |
| Chevrolet | C20 | 1978 - 1987 |
| Chevrolet | C30 | 1978 - 1986 |
| Chevrolet | K10 | 1978 - 1986 |
| Chevrolet | K20 | 1978 - 1986 |
| Chevrolet | K30 | 1978 - 1986 |
| GMC | C1500 | 1979 - 1986 |
| GMC | C15 | 1978 |
| GMC | C2500 | 1979 - 1986 |
| GMC | C25 | 1978 |
| GMC | C3500 | 1979 - 1986 |
| GMC | C35 | 1978 |
| GMC | K1500 | 1979 - 1986 |
| GMC | K15 | 1978 |
| GMC | K2500 | 1979 - 1986 |
| GMC | K25 | 1978 |
| GMC | K3500 | 1979 - 1986 |
| GMC | K35 | 1978 |
| Brand | AMD |
| Height | 7.5 in |
| Length | 33 in |
| Weight | 2 lbs |
| Width | 3.5 in |
