DMT 87-93 D/W Series Dodge truck steering column gasket. This gasket is made from a .250" off white, fine celled, modern gasket material, Volara.
1987 87 1988 88 1989 89 1990 90 1991 91 1992 92 1993 93 D100 D150 D250 D350 W100 W150 W250 W350
Material
250" Volara (off white fine textured foam) like OEM
In 1977, at 15, my first car was a 70 Barracuda I bought for $600 from my dad's co-worker at Chrysler Huber Ave Foundry. Tawny gold, 318, hub caps. Before I could "legally" drive it it had headers and a 4bbl. Had a couple other Mopars after this as a young man.
25 years later it was time to get another Mopar. After looking for 2 years I found a 1971 B5 blue Challenger right here in Michigan. 318 and hubcaps again. This time it cost over 10x as much, $6500. Didn't take long to add wheels, new leaf springs, 340 6bbl, etc. A year or two later I decided to completely redo the car. Had it media blasted and painted B5 blue again BUT when I went to put it back together I found there were no good body gaskets sets for Mopars. The gasket making journey began.
In 2004 I first made a kit to redo my Non A/C heater box using a laser engraver/cutter that I had for another side business. I showed the guys on Moparts and quickly had a few orders. I obviously made all the gaskets for my car because I had all the parts for templates. Many parts fit the other E body models so I soon had all the E body gaskets, then more body style, then more heater box kits and the rest is history.
| Make | Model | Years |
| Dodge | D100 | 1987 |
| Dodge | D150 | 1987 |
| Dodge | D250 | 1987 |
| Dodge | D350 | 1987 |
| Dodge | Dakota | 1987 |
| Dodge | Raider | 1987 |
| Dodge | Ram 50 | 1987 |
| Dodge | Ramcharger | 1987 |
| Dodge | W100 | 1987 |
| Dodge | W150 | 1987 |
| Dodge | W200 | 1987 |
| Dodge | W250 | 1987 |
| Dodge | W300 | 1987 |
| Dodge | W350 | 1987 |
