Replacement left-hand door weatherstrip designed for 1998 4-door quad cab trucks. This extruded rubber-style seal restores the door-to-body seal to prevent water intrusion, reduce wind noise, and block dust. Built for long-lasting performance and an OEM-style fit, it helps maintain cabin comfort and protects interior trim during restoration or routine maintenance. Easy to install with common hand tools, it provides reliable sealing and improved vehicle quietness.
Features:
- Fits 1998 4-door quad cab trucks — left-hand door weatherstrip (DWL 3110 98).
- Durable extruded rubber-style construction resists cracking and compression set.
- Seals door edges to prevent water leaks, wind noise, and dust intrusion.
- OEM-style profile for a secure fit and proper door alignment.
- Ideal for restoration or replacing worn, brittle, or missing seals.
- Simple installation with common tools; can be secured with adhesive or original retainers.
Installation / Application:
- Difficulty: 2/5
- Estimated time: 15–30 minutes per door
Instructions:
- Open the door and carefully remove the old weatherstrip by pulling it away from the retainer channel; use a trim tool if needed to lift clips.
- Inspect the retainer channel and remove any old adhesive, dirt, or debris. Clean the area thoroughly with isopropyl alcohol and a clean rag; allow to dry.
- Test-fit the new weatherstrip along the door edge to verify orientation and length. Trim any excess with a utility knife if necessary.
- If using adhesive, apply a thin bead to the channel or back of the weatherstrip per adhesive manufacturer instructions. Align the seal starting at the top hinge area and press it firmly into the retainer channel as you work around the door.
- Use light, even pressure along the seal to seat it fully into the channel. Use masking tape to hold sections in place if adhesive is used and tack-up time is required.
- Close the door gently and check for proper door shut, even compression of the seal, and no interference with trim or glass. Open and close the door several times to seat the seal.
- Allow adhesive to cure per product instructions (typically 24 hours) before exposing to moisture or high stress.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Dodge |
Ram 1500 |
1998 - 2001 |
| Dodge |
Ram 2500 |
1998 - 2002 |
| Dodge |
Ram 3500 |
1998 - 2002 |
