Right-hand rear corner tempered clear glass (BB0058 CLN) designed to restore visibility, weather sealing, and appearance for vehicles that use a corner vent/quarter window. This precision-cut tempered pane provides a reliable, shatter-resistant replacement that protects the interior from water and wind, maintains proper aerodynamics, and helps preserve vehicle value during restoration or repair. Engineered for durability and a near-OEM fit, the glass is straightforward to set with common automotive adhesives and trim hardware, offering dependable service and long-term clarity.
Features:
- Tempered clear glass for the right-hand rear corner (part number BB0058 CLN).
- Safety-tempered construction resists impact and breaks into small, less-harmful fragments.
- Restoration-grade replacement to restore weather-tight sealing and original appearance.
- Precision-cut edges for consistent fitment and easier sealing with urethane adhesives.
- Durable, scratch-resistant surface for long service life and clear visibility.
- Simple installation with standard automotive trim and adhesive techniques.
Installation / Application:
- Difficulty: 3/5
- Estimated time: 1–2 hours active (plus 24-hour adhesive cure time)
Instructions:
- Park vehicle on level ground, engage parking brake, and wear safety gloves and eye protection.
- Remove interior trim panels and any molding around the corner window to expose the glass perimeter and adhesive.
- Carefully cut through the old urethane or seal using a utility knife or gasket cutter; have an assistant hold or support the glass as you loosen it.
- Lift out the old glass with a suction cup lifter; dispose of tempered glass fragments safely if it is broken.
- Thoroughly clean the pinch weld and surrounding flange of old adhesive, rust, and debris using a paint-safe scraper and solvent; allow to dry.
- Apply primer to the vehicle flange and the edge of the replacement glass as per adhesive manufacturer instructions; allow primer flash time.
- Apply a continuous bead of urethane adhesive to the flange sized per the adhesive instructions.
- With an assistant, position the new rear corner glass into place, aligning edges and ensuring proper engagement with the flange; press firmly to seat the adhesive.
- Tape the glass in position to maintain alignment while the adhesive initial-cures.
- Reinstall trim and molding after initial set or after full cure as recommended by the adhesive manufacturer (typically allow 24 hours for full cure before driving).
- Clean excess adhesive from surrounding areas with appropriate solvent and reinstall all interior trim panels.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
Truck |
1947 - 1954 |
| GMC |
100-22 |
1947 - 1954 |
| GMC |
102-22 |
1952 - 1953 |
| GMC |
150-22 |
1947 - 1954 |
| GMC |
250-22 |
1951 - 1954 |
| GMC |
250 |
1951 - 1954 |
| GMC |
253-22 |
1952 - 1953 |
| GMC |
280-22 |
1951 - 1954 |
| GMC |
300 |
1951 - 1954 |
| GMC |
350-24 |
1951 - 1954 |
| GMC |
350-27 |
1951 - 1954 |
| GMC |
FC100-22 |
1952 |
| GMC |
FC101 |
1947 - 1950 |
| GMC |
FC102 |
1947 - 1950 |
| GMC |
FC152 |
1947 - 1950 |
| GMC |
FC251 |
1947 - 1950 |
| GMC |
FC252 |
1947 - 1950 |
| GMC |
P152 |
1951 |
| GMC |
PM152-22 |
1952 - 1954 |
