A direct-fit windshield weatherstrip engineered to seal and secure windshields that use steel trim. The channeled profile with a dedicated trim groove accepts steel finish trim while compressing to form a watertight, wind-noise barrier. Constructed from weather-resistant rubber compound, it restores proper glass alignment, prevents leaks and reduces vibration — ideal for restoration or replacement on GM steel-trim applications. Durable, reliable, and simple to install for a factory-like result.
Features:
- Fits GM vehicles using steel-trim windshields (WCR 587 D profile).
- Rubber compound resists UV, ozone and temperature extremes for long life.
- Integrated trim groove secures steel finish trim for a clean factory appearance.
- Seals against water, wind and road noise to protect the interior and glass edge.
- OEM-style profile for correct glass alignment and reduced vibration.
- Easy to trim and install for restoration or replacement projects.
Installation / Application:
- Difficulty: 2/5
- Estimated time: 30–60 minutes
Instructions:
- Remove the old weatherstrip and any remaining adhesive or debris from the windshield channel and pinch weld.
- Carefully inspect the steel trim and windshield flange for rust or damage; clean and treat as needed before installing the new seal.
- Dry-fit the new weatherstrip around the windshield to confirm orientation and trim length; mark any trimming points with masking tape.
- Trim excess material with a utility knife or scissors, making straight cuts and leaving enough overlap at joints for a tight seal.
- Clean the installation surface with rubbing alcohol to remove oils and dust; allow to dry completely.
- If specified for your vehicle, apply a thin bead of weatherstrip adhesive in the channel following the adhesive manufacturer's instructions.
- Press the seal into the windshield channel, ensuring the trim groove fully accepts the steel trim; use a plastic trim tool to seat the section evenly and avoid pinching the seal.
- Reinstall the steel trim into the groove, check for uniform compression around the glass, remove any excess adhesive, and allow adhesive to cure before driving.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
C10 Panel |
1960 - 1963 |
| Chevrolet |
C10 Pickup |
1960 - 1963 |
| Chevrolet |
C20 Pickup |
1960 - 1963 |
| Chevrolet |
C30 Pickup |
1960 - 1963 |
| Chevrolet |
C40 |
1960 - 1962 |
| Chevrolet |
C50 |
1960 - 1963 |
| Chevrolet |
K10 Pickup |
1960 - 1963 |
| Chevrolet |
K20 Pickup |
1960 - 1963 |
| Chevrolet |
Suburban |
1960 - 1963 |
| GMC |
1000 Series |
1960 - 1963 |
| GMC |
1500 Series |
1960 - 1963 |
| GMC |
2500 Series |
1960 - 1963 |
| GMC |
3000 |
1960 - 1963 |
| GMC |
3500 |
1960 - 1963 |
| GMC |
Suburban |
1960 - 1963 |
